Questo forum utilizza i cookies
Questo forum fa uso di cookie per migliorare l'esperienza utente. I cookie sono piccoli file di testo memorizzati sul tuo browser. I cookie impostati dal forum possono essere utilizzati solo su questo sito e non costituiscono rischio per la sicurezza, vengono utilizzati unicamente per memorizzare le tue preferenze. Navigando sul sito accetti che RaspberryItaly installi i cookie sul tuo browser.
Per maggiori informazioni consulta l'informativa sui Cookie di RasberryItaly

Un cookie verra memorizzato nel browser indipendentemente dalla scelta per evitare che questa domanda ti venga posta di nuovo. Sarai in grado di modificare le impostazioni dei cookie in qualsiasi momento utilizzando il link nel footer.
  • Benvenuti su RaspberryItaly!
Benvenuto ospite! Login Login con Facebook Registrati Login with Facebook


Valutazione discussione:
  • 0 voto(i) - 0 media
  • 1
  • 2
  • 3
  • 4
  • 5

[-]
Tags
v2 modulo noir pi raspberry 1 2 camera e

Raspberry pi 2 e modulo camera noir v2.1
#1
Salve a tutti! Ho comprato il modulo camera v 2.1 da 8 mega pixel. Installato in un raspi pi2 con raspbian jessie ma non riesco a farla funzionare mi esce sempre fuori lo stesso errore che vi mostro di seguito:

Codice:
pi@raspberrypi:~ $ raspistill -t 30000
mmal: mmal_vc_component_create: failed to create component 'vc.ril.camera' (1:ENOMEM)
mmal: mmal_component_create_core: could not create component 'vc.ril.camera' (1)
mmal: Failed to create camera component
mmal: main: Failed to create camera component
mmal: Camera is not detected. Please check carefully the camera module is installed correctly

quando invece do il comando "dmesg":

Codice:
pi@raspberrypi:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.13-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] cma: Reserved 8 MiB at 0x36800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 225280
[    0.000000] free_area_init_node: node 0, pgdat 8085f000, node_mem_map b6036000
[    0.000000]   Normal zone: 1980 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 225280 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 13 pages/cpu @b5ff4000 s20608 r8192 d24448 u53248
[    0.000000] pcpu-alloc: s20608 r8192 d24448 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 223300
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2709.boardrev=0xa01041 bcm2709.serial=0x4c6440e8 smsc95xx.macaddr=B8:27:EB:64:40:E8 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 874536K/901120K available (5967K kernel code, 534K rwdata, 1652K rodata, 420K init, 757K bss, 18392K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
   vector  : 0xffff0000 - 0xffff1000   (   4 kB)
   fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
   vmalloc : 0xb7800000 - 0xff000000   (1144 MB)
   lowmem  : 0x80000000 - 0xb7000000   ( 880 MB)
   modules : 0x7f000000 - 0x80000000   (  16 MB)
     .text : 0x80008000 - 0x80778f64   (7620 kB)
     .init : 0x80779000 - 0x807e2000   ( 420 kB)
     .data : 0x807e2000 - 0x80867b6c   ( 535 kB)
      .bss : 0x8086a000 - 0x8092779c   ( 758 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Additional per-CPU info printed with stalls.
[    0.000000] NR_IRQS:608
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000032] Switching to timer-based delay loop, resolution 52ns
[    0.000320] Console: colour dummy device 80x30
[    0.002084] console [tty1] enabled
[    0.002151] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.002251] pid_max: default: 32768 minimum: 301
[    0.002624] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002690] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003990] Initializing cgroup subsys blkio
[    0.004070] Initializing cgroup subsys memory
[    0.004137] Initializing cgroup subsys devices
[    0.004198] Initializing cgroup subsys freezer
[    0.004272] Initializing cgroup subsys net_cls
[    0.004380] CPU: Testing write buffer coherency: ok
[    0.004499] ftrace: allocating 20235 entries in 60 pages
[    0.053957] CPU0: update cpu_capacity 1024
[    0.054040] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.054087] [bcm2709_smp_prepare_cpus] enter
[    0.054252] Setting up static identity map for 0x8240 - 0x8274
[    0.113833] [bcm2709_boot_secondary] cpu:1 started (0) 17
[    0.114269] [bcm2709_secondary_init] enter cpu:1
[    0.114323] CPU1: update cpu_capacity 1024
[    0.114331] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.133808] [bcm2709_boot_secondary] cpu:2 started (0) 17
[    0.134174] [bcm2709_secondary_init] enter cpu:2
[    0.134206] CPU2: update cpu_capacity 1024
[    0.134214] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.153847] [bcm2709_boot_secondary] cpu:3 started (0) 16
[    0.154103] [bcm2709_secondary_init] enter cpu:3
[    0.154132] CPU3: update cpu_capacity 1024
[    0.154140] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.154236] Brought up 4 CPUs
[    0.154370] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.154411] CPU: All CPU(s) started in HYP mode.
[    0.154447] CPU: Virtualization extensions available.
[    0.155458] devtmpfs: initialized
[    0.179814] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.180207] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.181358] pinctrl core: initialized pinctrl subsystem
[    0.182193] NET: Registered protocol family 16
[    0.187992] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.189255] bcm2709.uart_clock = 3000000
[    0.194461] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.194532] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.194752] Serial: AMBA PL011 UART driver
[    0.194968] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
[    0.195588] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.265412] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
[    0.265516] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
[    0.266276] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
[    0.266329] bcm2708-dmaengine 3f007000.dma: dma_debug:0
[    0.267112] SCSI subsystem initialized
[    0.267391] usbcore: registered new interface driver usbfs
[    0.267534] usbcore: registered new interface driver hub
[    0.267718] usbcore: registered new device driver usb
[    0.268473] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-11-18 15:48
[    0.295880] Switched to clocksource arch_sys_counter
[    0.345055] FS-Cache: Loaded
[    0.345494] CacheFiles: Loaded
[    0.359097] NET: Registered protocol family 2
[    0.360527] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.360723] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.360964] TCP: Hash tables configured (established 8192 bind 8192)
[    0.361120] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.361217] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.361610] NET: Registered protocol family 1
[    0.362138] RPC: Registered named UNIX socket transport module.
[    0.362190] RPC: Registered udp transport module.
[    0.362228] RPC: Registered tcp transport module.
[    0.362265] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.363464] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.364926] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.380906] VFS: Disk quotas dquot_6.6.0
[    0.381341] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.383958] FS-Cache: Netfs 'nfs' registered for caching
[    0.385184] NFS: Registering the id_resolver key type
[    0.385320] Key type id_resolver registered
[    0.385360] Key type id_legacy registered
[    0.388196] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.388441] io scheduler noop registered
[    0.388491] io scheduler deadline registered (default)
[    0.388849] io scheduler cfq registered
[    0.391438] BCM2708FB: allocated DMA memory f6c00000
[    0.391512] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.423026] Console: switching to colour frame buffer device 200x75
[    0.442832] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
[    0.444297] vc-cma: Videocore CMA driver
[    0.444401] vc-cma: vc_cma_base      = 0x00000000
[    0.444505] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    0.444621] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    0.444972] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    0.461647] brd: module loaded
[    0.470975] loop: module loaded
[    0.472125] vchiq: vchiq_init_state: slot_zero = 0xb6c80000, is_master = 0
[    0.474073] Loading iSCSI transport class v2.0-870.
[    0.475120] usbcore: registered new interface driver smsc95xx
[    0.475328] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.675813] Core Release: 2.80a
[    0.675947] Setting default values for core params
[    0.676097] Finished setting default values for core params
[    0.876625] Using Buffer DMA mode
[    0.876713] Periodic Transfer Interrupt Enhancement - disabled
[    0.876837] Multiprocessor Interrupt Enhancement - disabled
[    0.876956] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.877059] Dedicated Tx FIFOs mode
[    0.877521] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb6c14000 dma = 0xf6c14000 len=9024
[    0.877749] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
[    0.878074] dwc_otg: Microframe scheduler enabled
[    0.878151] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80402c54
[    0.878289] WARN::hcd_init_fiq:413: FIQ ASM at 0x80402fb0 length 36
[    0.878428] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb789a000
[    0.878594] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.878746] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.878930] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
[    0.879095] Init: Port Power? op_state=1
[    0.879184] Init: Power Port (0)
[    0.879567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.879720] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.879872] usb usb1: Product: DWC OTG Controller
[    0.879980] usb usb1: Manufacturer: Linux 4.1.13-v7+ dwc_otg_hcd
[    0.880110] usb usb1: SerialNumber: 3f980000.usb
[    0.881151] hub 1-0:1.0: USB hub found
[    0.881302] hub 1-0:1.0: 1 port detected
[    0.887515] dwc_otg: FIQ enabled
[    0.887531] dwc_otg: NAK holdoff enabled
[    0.887542] dwc_otg: FIQ split-transaction FSM enabled
[    0.887584] Module dwc_common_port init
[    0.887996] usbcore: registered new interface driver usb-storage
[    0.893981] mousedev: PS/2 mouse device common for all mice
[    0.900600] bcm2835-cpufreq: min=600000 max=1000000
[    0.906689] sdhci: Secure Digital Host Controller Interface driver
[    0.912369] sdhci: Copyright(c) Pierre Ossman
[    0.918508] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    0.924179] mmc-bcm2835 3f300000.mmc: DMA channels allocated
[    0.966264] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.976950] ledtrig-cpu: registered to indicate activity on CPUs
[    0.982911] hidraw: raw HID events driver (C) Jiri Kosina
[    0.989947] usbcore: registered new interface driver usbhid
[    0.996788] usbhid: USB HID core driver
[    1.003991] Initializing XFRM netlink socket
[    1.009812] NET: Registered protocol family 17
[    1.018947] Key type dns_resolver registered
[    1.025134] Registering SWP/SWPB emulation handler
[    1.031765] registered taskstats version 1
[    1.037699] vc-sm: Videocore shared memory driver
[    1.043199] [vc_sm_connected_init]: start
[    1.049502] [vc_sm_connected_init]: end - returning 0
[    1.057071] Waiting for root device /dev/mmcblk0p2...
[    1.062668] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.070473] mmc0: new high speed SDHC card at address 59b4
[    1.076614] mmcblk0: mmc0:59b4 NCard 30.0 GiB
[    1.083373]  mmcblk0: p1 p2
[    1.086063] Indeed it is in host mode hprt0 = 00021501
[    1.179953] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    1.185598] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    1.265942] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.271856] Indeed it is in host mode hprt0 = 00001101
[    1.476315] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.482131] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.488844] hub 1-1:1.0: USB hub found
[    1.494724] hub 1-1:1.0: 5 ports detected
[    1.775925] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.834309] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[    1.840557] EXT4-fs (mmcblk0p2): 1 orphan inode deleted
[    1.846312] EXT4-fs (mmcblk0p2): recovery complete
[    1.896306] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.901445] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.901515] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.904205] devtmpfs: mounted
[    1.904962] Freeing unused kernel memory: 420K (80779000 - 807e2000)
[    1.925167] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.934018] smsc95xx v1.0.4
[    2.000254] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:64:40:e8
[    2.245959] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[    2.310846] random: systemd urandom read with 80 bits of entropy available
[    2.322073] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    2.329087] systemd[1]: Detected architecture 'arm'.
[    2.370818] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0b07
[    2.377168] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.383408] usb 1-1.2: Product: Logitech BT Mini-Receiver
[    2.389665] usb 1-1.2: Manufacturer: Logitech
[    2.397158] hub 1-1.2:1.0: USB hub found
[    2.403943] hub 1-1.2:1.0: 3 ports detected
[    2.506062] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[    2.519934] NET: Registered protocol family 10
[    2.528166] systemd[1]: Inserted module 'ipv6'
[    2.536460] systemd[1]: Set hostname to <raspberrypi>.
[    2.644199] usb 1-1.4: New USB device found, idVendor=148f, idProduct=5370
[    2.650695] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.657047] usb 1-1.4: Product: 802.11 n WLAN
[    2.663298] usb 1-1.4: Manufacturer: Ralink
[    2.669768] usb 1-1.4: SerialNumber: 1.0
[    2.715962] usb 1-1.2.2: new full-speed USB device number 6 using dwc_otg
[    2.844521] usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c71e
[    2.850979] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.857309] usb 1-1.2.2: Product: Logitech BT Mini-Receiver
[    2.863544] usb 1-1.2.2: Manufacturer: Logitech
[    2.869782] usb 1-1.2.2: SerialNumber: 001F201071FE
[    2.895802] input: Logitech Logitech BT Mini-Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C71E.0001/input/input0
[    2.956326] hid-generic 0003:046D:C71E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-3f980000.usb-1.2.2/input0
[    3.035951] usb 1-1.2.3: new full-speed USB device number 7 using dwc_otg
[    3.168318] usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c71f
[    3.175109] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.181882] usb 1-1.2.3: Product: Logitech BT Mini-Receiver
[    3.188568] usb 1-1.2.3: Manufacturer: Logitech
[    3.195233] usb 1-1.2.3: SerialNumber: 001F201071FE
[    3.279102] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.286419] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.293178] systemd[1]: Starting Remote File Systems (Pre).
[    3.307856] systemd[1]: Reached target Remote File Systems (Pre).
[    3.314684] systemd[1]: Starting Encrypted Volumes.
[    3.329240] systemd[1]: Reached target Encrypted Volumes.
[    3.336205] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.351538] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.358589] systemd[1]: Starting Swap.
[    3.373390] systemd[1]: Reached target Swap.
[    3.380338] systemd[1]: Expecting device dev-mmcblk0p1.device...
[    3.395003] systemd[1]: Starting Root Slice.
[    3.409756] systemd[1]: Created slice Root Slice.
[    3.416636] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.431591] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.438587] systemd[1]: Starting Delayed Shutdown Socket.
[    3.453526] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.460562] systemd[1]: Starting Journal Socket (/dev/log).
[    3.475568] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.482537] systemd[1]: Starting User and Session Slice.
[    3.497537] systemd[1]: Created slice User and Session Slice.
[    3.504449] systemd[1]: Starting udev Control Socket.
[    3.519142] systemd[1]: Listening on udev Control Socket.
[    3.525849] systemd[1]: Starting udev Kernel Socket.
[    3.540044] systemd[1]: Listening on udev Kernel Socket.
[    3.546545] systemd[1]: Starting Journal Socket.
[    3.560514] systemd[1]: Listening on Journal Socket.
[    3.567095] systemd[1]: Starting System Slice.
[    3.581042] systemd[1]: Created slice System Slice.
[    3.587472] systemd[1]: Starting system-systemd\x2dfsck.slice.
[    3.601617] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.608273] systemd[1]: Starting Increase datagram queue length...
[    3.625650] systemd[1]: Starting Restore / save the current clock...
[    3.667272] systemd[1]: Starting Load Kernel Modules...
[    3.694626] systemd[1]: Started Set Up Additional Binary Formats.
[    3.703150] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.726819] systemd[1]: Mounting Debug File System...
[    3.747929] systemd[1]: Mounting POSIX Message Queue File System...
[    3.767242] systemd[1]: Mounted Huge Pages File System.
[    3.773079] fuse init (API version 7.23)
[    3.782755] systemd[1]: Starting udev Coldplug all Devices...
[    3.801882] i2c /dev entries driver
[    3.803402] systemd[1]: Starting File System Check on Root Device...
[    3.829629] systemd[1]: Starting system-autologin.slice.
[    3.844606] systemd[1]: Created slice system-autologin.slice.
[    3.851398] systemd[1]: Starting Slices.
[    3.859995] media: Linux media interface: v0.10
[    3.873302] systemd[1]: Reached target Slices.
[    3.891577] systemd[1]: Mounted POSIX Message Queue File System.
[    3.895790] Linux video capture interface: v2.00
[    3.912988] systemd[1]: Mounted Debug File System.
[    3.929021] systemd[1]: Started Increase datagram queue length.
[    3.970484] systemd[1]: Started Restore / save the current clock.
[    3.981804] : [color=#ffcc33]bcm2835-v4l2: error -1 while loading driver[/color]
[    3.993395] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    4.010238] systemd[1]: Time has been changed
[    4.091960] systemd[1]: Started udev Coldplug all Devices.
[    4.100088] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
[    4.123337] systemd[1]: Failed to start Load Kernel Modules.
[    4.130400] systemd[1]: Unit systemd-modules-load.service entered failed state.
[    4.147068] systemd[1]: Started File System Check on Root Device.
[    4.302694] systemd[1]: Mounting FUSE Control File System...
[    4.320757] systemd[1]: Starting Apply Kernel Variables...
[    4.341096] systemd[1]: Mounting Configuration File System...
[    4.360546] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.380698] systemd[1]: Starting Syslog Socket.
[    4.389812] systemd[1]: Listening on Syslog Socket.
[    4.390036] systemd[1]: Starting Journal Service...
[    4.410870] systemd[1]: Started Journal Service.
[    4.596751] systemd-udevd[110]: starting version 215
[    4.747224] random: nonblocking pool is initialized
[    5.117006] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    5.124323] spi spi0.0: setting up native-CS0 as GPIO 8
[    5.127092] spi spi0.1: setting up native-CS1 as GPIO 7
[    5.135245] bcm2708_i2c 3f804000.i2c: BSC1 Controller at 0x3f804000 (irq 79) (baudrate 100000)
[    5.384132] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.540924] input: Logitech Logitech BT Mini-Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/0003:046D:C71F.0002/input/input1
[    5.554531] cfg80211: Calling CRDA to update world regulatory domain
[    5.599323] logitech 0003:046D:C71F.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-3f980000.usb-1.2.3/input0
[    5.776036] usb 1-1.4: reset high-speed USB device number 5 using dwc_otg
[    5.887052] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[    5.912787] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[    5.944163] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.949222] usbcore: registered new interface driver rt2800usb
[    5.991603] cfg80211: World regulatory domain updated:
[    5.991640] cfg80211:  DFS Master region: unset
[    5.991654] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.991674] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    5.991693] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.991708] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    5.991726] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    5.991745] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    5.991761] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    5.991777] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    5.991793] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    6.389516] systemd-journald[108]: Received request to flush runtime journal from PID 1
[    6.826384] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[    6.830126] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[    7.164031] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    8.295564] Adding 102396k swap on /var/swap.  Priority:-1 extents:5 across:1929212k SSFS
[    8.738879] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    8.740460] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.550835] [color=#ffcc33]bcm2708_fb soc:fb: Unknown ioctl 0x40187a22[/color]
[   10.302646] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.307683] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1

Da cosa dipende? cosa sbaglio?
Risposta
#2
Non ho un modulo camera RaspberryPi, quindi non ti so aiutare direttamente..
Però, dei consigli generali :
Hai il sistema aggiornato?
Codice:
sudo apt-get update[code]
[code]sudo apt-get upgrade

Hai abilitato il supporto alla Camera col comando raspi-config (o il suo equivalente grafico in Raspbian)?
Risposta
#3
si tutto fatto! ho anche aggiornato il firmware tramite rpi-update. qualcosa è cambiato, il modulo viene caricato e il dmesg riconosce il driver:

Codice:
pi@raspberrypi:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Linux version 4.9.72-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1069 SMP Fri Dec 29 17:21:52 GMT 2017
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] cma: Reserved 8 MiB at 0x37800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 229376
[    0.000000] free_area_init_node: node 0, pgdat 80c6f440, node_mem_map b7016000
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] percpu: Embedded 14 pages/cpu @b6fd0000 s25600 r8192 d23552 u57344
[    0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227360
[    0.000000] Kernel command line: bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 887584K/917504K available (7168K kernel code, 486K rwdata, 2012K rodata, 1024K init, 770K bss, 21728K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
    lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x80800000   (8160 kB)
      .init : 0x80b00000 - 0x80c00000   (1024 kB)
      .data : 0x80c00000 - 0x80c798fc   ( 487 kB)
       .bss : 0x80c7b000 - 0x80d3b9a4   ( 771 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000024] Switching to timer-based delay loop, resolution 52ns
[    0.000331] Console: colour dummy device 80x30
[    0.000355] console [tty1] enabled
[    0.000383] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000405] pid_max: default: 32768 minimum: 301
[    0.000779] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000793] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002077] Disabling memory control group subsystem
[    0.002184] CPU: Testing write buffer coherency: ok
[    0.002236] ftrace: allocating 22401 entries in 66 pages
[    0.053712] CPU0: update cpu_capacity 1024
[    0.053733] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.053778] Setting up static identity map for 0x100000 - 0x100034
[    0.056572] CPU1: update cpu_capacity 1024
[    0.056583] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.057618] CPU2: update cpu_capacity 1024
[    0.057628] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.058623] CPU3: update cpu_capacity 1024
[    0.058633] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.058758] Brought up 4 CPUs
[    0.058773] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.058779] CPU: All CPU(s) started in HYP mode.
[    0.058783] CPU: Virtualization extensions available.
[    0.059888] devtmpfs: initialized
[    0.073849] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.074236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.074263] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.075048] pinctrl core: initialized pinctrl subsystem
[    0.076336] NET: Registered protocol family 16
[    0.078991] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.089653] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.089664] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.089867] Serial: AMBA PL011 UART driver
[    0.092304] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.175161] bcm2835-dma 3f007000.dma: DMA legacy API manager at b880f000, dmachans=0x1
[    0.177568] SCSI subsystem initialized
[    0.177783] usbcore: registered new interface driver usbfs
[    0.177885] usbcore: registered new interface driver hub
[    0.178033] usbcore: registered new device driver usb
[    0.183575] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-12-01 16:20
[    0.185404] clocksource: Switched to clocksource arch_sys_counter
[    0.240503] VFS: Disk quotas dquot_6.6.0
[    0.240612] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.240919] FS-Cache: Loaded
[    0.241277] CacheFiles: Loaded
[    0.257961] NET: Registered protocol family 2
[    0.259229] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.259360] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.259548] TCP: Hash tables configured (established 8192 bind 8192)
[    0.259659] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.259716] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.260026] NET: Registered protocol family 1
[    0.260675] RPC: Registered named UNIX socket transport module.
[    0.260684] RPC: Registered udp transport module.
[    0.260690] RPC: Registered tcp transport module.
[    0.260696] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.261868] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.264926] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.283965] FS-Cache: Netfs 'nfs' registered for caching
[    0.285266] NFS: Registering the id_resolver key type
[    0.285315] Key type id_resolver registered
[    0.285322] Key type id_legacy registered
[    0.288783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.288960] io scheduler noop registered
[    0.288969] io scheduler deadline registered (default)
[    0.289342] io scheduler cfq registered
[    0.295028] BCM2708FB: allocated DMA memory f7900000
[    0.295065] BCM2708FB: allocated DMA channel 0 @ b880f000
[    0.352544] Console: switching to colour frame buffer device 200x75
[    0.389154] bcm2835-rng 3f104000.rng: hwrng registered
[    0.389304] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.390045] vc-sm: Videocore shared memory driver
[    0.411200] brd: module loaded
[    0.423101] loop: module loaded
[    0.423119] Loading iSCSI transport class v2.0-870.
[    0.423914] usbcore: registered new interface driver smsc95xx
[    0.423939] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.652226] Core Release: 2.80a
[    0.652241] Setting default values for core params
[    0.652287] Finished setting default values for core params
[    0.852762] Using Buffer DMA mode
[    0.852771] Periodic Transfer Interrupt Enhancement - disabled
[    0.852776] Multiprocessor Interrupt Enhancement - disabled
[    0.852786] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.852809] Dedicated Tx FIFOs mode
[    0.853329] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xb7914000 dma = 0xf7914000 len=9024
[    0.853360] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[    0.853369] dwc_otg: Microframe scheduler enabled
[    0.853436] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80590a9c
[    0.853449] WARN::hcd_init_fiq:460: FIQ ASM at 0x80590e0c length 36
[    0.853463] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887a000
[    0.853542] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.853589] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.853634] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.853683] Init: Port Power? op_state=1
[    0.853689] Init: Power Port (0)
[    0.854002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.854015] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.854025] usb usb1: Product: DWC OTG Controller
[    0.854036] usb usb1: Manufacturer: Linux 4.9.72-v7+ dwc_otg_hcd
[    0.854046] usb usb1: SerialNumber: 3f980000.usb
[    0.855159] hub 1-0:1.0: USB hub found
[    0.855220] hub 1-0:1.0: 1 port detected
[    0.856215] dwc_otg: FIQ enabled
[    0.856223] dwc_otg: NAK holdoff enabled
[    0.856228] dwc_otg: FIQ split-transaction FSM enabled
[    0.856246] Module dwc_common_port init
[    0.856598] usbcore: registered new interface driver usb-storage
[    0.856964] mousedev: PS/2 mouse device common for all mice
[    0.858370] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.858748] bcm2835-cpufreq: min=600000 max=1000000
[    0.859311] sdhci: Secure Digital Host Controller Interface driver
[    0.859318] sdhci: Copyright(c) Pierre Ossman
[    0.859696] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[    0.859962] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.860791] ledtrig-cpu: registered to indicate activity on CPUs
[    0.860966] hidraw: raw HID events driver (C) Jiri Kosina
[    0.861236] usbcore: registered new interface driver usbhid
[    0.861242] usbhid: USB HID core driver
[    0.862314] vchiq: vchiq_init_state: slot_zero = 0xb7980000, is_master = 0
[    0.864058] [vc_sm_connected_init]: start
[    0.873817] [vc_sm_connected_init]: end - returning 0
[    0.874320] Initializing XFRM netlink socket
[    0.874355] NET: Registered protocol family 17
[    0.874515] Key type dns_resolver registered
[    0.875020] Registering SWP/SWPB emulation handler
[    0.876102] registered taskstats version 1
[    0.883028] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.883135] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.883210] console [ttyAMA0] enabled
[    0.885472] sdhost: log_buf @ b7913000 (f7913000)
[    0.965438] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.965573] of_cfs_init
[    0.965708] of_cfs_init: OK
[    0.966532] Waiting for root device /dev/mmcblk0p2...
[    1.032649] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.034641] mmc0: new high speed SDHC card at address 59b4
[    1.035711] mmcblk0: mmc0:59b4 NCard 30.0 GiB
[    1.037445]  mmcblk0: p1 p2
[    1.075571] Indeed it is in host mode hprt0 = 00021501
[    1.107620] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.107696] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.108697] devtmpfs: mounted
[    1.137574] Freeing unused kernel memory: 1024K
[    1.162021] random: fast init done
[    1.275479] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.275687] Indeed it is in host mode hprt0 = 00001101
[    1.505902] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.505921] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.507105] hub 1-1:1.0: USB hub found
[    1.507247] hub 1-1:1.0: 5 ports detected
[    1.571531] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    1.572126] systemd[1]: Detected architecture 'arm'.
[    1.716456] NET: Registered protocol family 10
[    1.718740] systemd[1]: Inserted module 'ipv6'
[    1.721170] systemd[1]: Set hostname to <raspberrypi>.
[    1.825516] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.860558] uart-pl011 3f201000.serial: no DMA platform data
[    1.955878] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.955898] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.959116] smsc95xx v1.0.5
[    2.051117] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:64:40:e8
[    2.355500] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[    2.487508] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.488321] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.488451] systemd[1]: Expecting device dev-ttyAMA0.device...
[    2.488821] systemd[1]: Starting Remote File Systems (Pre).
[    2.488955] systemd[1]: Reached target Remote File Systems (Pre).
[    2.489122] systemd[1]: Starting Encrypted Volumes.
[    2.490604] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0b07
[    2.490623] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.490633] usb 1-1.2: Product: Logitech BT Mini-Receiver
[    2.490643] usb 1-1.2: Manufacturer: Logitech
[    2.491963] hub 1-1.2:1.0: USB hub found
[    2.492590] hub 1-1.2:1.0: 3 ports detected
[    2.585537] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[    2.627765] fuse init (API version 7.26)
[    2.712591] i2c /dev entries driver
[    2.733897] usb 1-1.4: New USB device found, idVendor=148f, idProduct=5370
[    2.733922] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.733934] usb 1-1.4: Product: 802.11 n WLAN
[    2.733944] usb 1-1.4: Manufacturer: Ralink
[    2.733954] usb 1-1.4: SerialNumber: 1.0
[    2.816974] usb 1-1.2.2: new full-speed USB device number 6 using dwc_otg
[    2.842282] media: Linux media interface: v0.10
[    2.893548] Linux video capture interface: v2.00
[    2.970839] usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c71e
[    2.970865] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.970877] usb 1-1.2.2: Product: Logitech BT Mini-Receiver
[    2.970889] usb 1-1.2.2: Manufacturer: Logitech
[    2.970899] usb 1-1.2.2: SerialNumber: 001F201071FE
[    2.991543] input: Logitech Logitech BT Mini-Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C71E.0001/input/input0
[    3.009665] systemd-udevd[137]: starting version 215
[    3.057393] hid-generic 0003:046D:C71E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-3f980000.usb-1.2.2/input0
[    3.155534] usb 1-1.2.3: new full-speed USB device number 7 using dwc_otg
[    3.315575] usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c71f
[    3.315598] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.315610] usb 1-1.2.3: Product: Logitech BT Mini-Receiver
[    3.315620] usb 1-1.2.3: Manufacturer: Logitech
[    3.315630] usb 1-1.2.3: SerialNumber: 001F201071FE
[    4.097626] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.155563] usb 1-1.4: reset high-speed USB device number 5 using dwc_otg
[    4.296197] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[    4.318217] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[    4.340731] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.343600] usbcore: registered new interface driver rt2800usb
[    4.410203] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    4.649372] input: Logitech Logitech BT Mini-Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/0003:046D:C71F.0002/input/input1
[    4.719929] logitech 0003:046D:C71F.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-3f980000.usb-1.2.3/input0
[    5.197077] systemd-journald[121]: Received request to flush runtime journal from PID 1
[    7.207893] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[    7.210293] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[    7.531058] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.625137] random: crng init done
[    8.662455] Adding 102396k swap on /var/swap.  Priority:-1 extents:5 across:1929212k SSFS
[    9.188606] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   10.724518] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   15.692963] Bluetooth: Core ver 2.22
[   15.693067] NET: Registered protocol family 31
[   15.693074] Bluetooth: HCI device and connection manager initialized
[   15.693096] Bluetooth: HCI socket layer initialized
[   15.693110] Bluetooth: L2CAP socket layer initialized
[   15.693146] Bluetooth: SCO socket layer initialized
[   15.727172] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.727184] Bluetooth: BNEP filters: protocol multicast
[   15.727206] Bluetooth: BNEP socket layer initialized
pi@raspberrypi:~ $


però ancora non funziona!
Risposta
#4
leggi https://www.raspberryitaly.com/visore-no...mera-noir/

Forse troverai il comando necessario.
Heart Libro  | Blog EnricoSartori.it | Idea YouTube
Se un utente ti è stato utile, aumenta la sua reputazione! premi il Pollicione! 
Risposta
#5
Non ci sto capendo più niente. comincio a pensare che sia il modulo camera d avere problemi.
ecco il risultato di DMESG:

Codice:
pi@raspberrypi:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0xf00
[    0.000000] Linux version 4.9.72-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #1069 SMP Fri Dec 29 17:21:52 GMT 2017
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Raspberry Pi 2 Model B Rev 1.1
[    0.000000] cma: Reserved 8 MiB at 0x37800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 229376
[    0.000000] free_area_init_node: node 0, pgdat 80c6f440, node_mem_map b7016000
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] percpu: Embedded 14 pages/cpu @b6fd0000 s25600 r8192 d23552 u57344
[    0.000000] pcpu-alloc: s25600 r8192 d23552 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227360
[    0.000000] Kernel command line: bcm2708_fb.fbwidth=1600 bcm2708_fb.fbheight=1200 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 887584K/917504K available (7168K kernel code, 486K rwdata, 2012K rodata, 1024K init, 770K bss, 21728K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
    lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
    modules : 0x7f000000 - 0x80000000   (  16 MB)
      .text : 0x80008000 - 0x80800000   (8160 kB)
      .init : 0x80b00000 - 0x80c00000   (1024 kB)
      .data : 0x80c00000 - 0x80c798fc   ( 487 kB)
       .bss : 0x80c7b000 - 0x80d3b9a4   ( 771 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000025] Switching to timer-based delay loop, resolution 52ns
[    0.000331] Console: colour dummy device 80x30
[    0.000352] console [tty1] enabled
[    0.000377] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000399] pid_max: default: 32768 minimum: 301
[    0.000774] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000788] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002074] Disabling memory control group subsystem
[    0.002190] CPU: Testing write buffer coherency: ok
[    0.002244] ftrace: allocating 22401 entries in 66 pages
[    0.053701] CPU0: update cpu_capacity 1024
[    0.053722] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[    0.053769] Setting up static identity map for 0x100000 - 0x100034
[    0.056583] CPU1: update cpu_capacity 1024
[    0.056594] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[    0.057624] CPU2: update cpu_capacity 1024
[    0.057634] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[    0.058629] CPU3: update cpu_capacity 1024
[    0.058639] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[    0.058765] Brought up 4 CPUs
[    0.058782] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.058787] CPU: All CPU(s) started in HYP mode.
[    0.058792] CPU: Virtualization extensions available.
[    0.059899] devtmpfs: initialized
[    0.073867] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.074260] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.074286] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.075068] pinctrl core: initialized pinctrl subsystem
[    0.076361] NET: Registered protocol family 16
[    0.079022] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.089699] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.089710] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.089910] Serial: AMBA PL011 UART driver
[    0.092323] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.175160] bcm2835-dma 3f007000.dma: DMA legacy API manager at b880f000, dmachans=0x1
[    0.177575] SCSI subsystem initialized
[    0.177786] usbcore: registered new interface driver usbfs
[    0.177885] usbcore: registered new interface driver hub
[    0.178034] usbcore: registered new device driver usb
[    0.183573] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-12-01 16:20
[    0.185401] clocksource: Switched to clocksource arch_sys_counter
[    0.240488] VFS: Disk quotas dquot_6.6.0
[    0.240598] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.240904] FS-Cache: Loaded
[    0.241263] CacheFiles: Loaded
[    0.257942] NET: Registered protocol family 2
[    0.259216] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.259347] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.259535] TCP: Hash tables configured (established 8192 bind 8192)
[    0.259649] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.259707] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.260012] NET: Registered protocol family 1
[    0.260666] RPC: Registered named UNIX socket transport module.
[    0.260676] RPC: Registered udp transport module.
[    0.260682] RPC: Registered tcp transport module.
[    0.260687] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.261860] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.264916] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    0.283952] FS-Cache: Netfs 'nfs' registered for caching
[    0.285246] NFS: Registering the id_resolver key type
[    0.285289] Key type id_resolver registered
[    0.285295] Key type id_legacy registered
[    0.288702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.288875] io scheduler noop registered
[    0.288883] io scheduler deadline registered (default)
[    0.289256] io scheduler cfq registered
[    0.294939] BCM2708FB: allocated DMA memory f7900000
[    0.294976] BCM2708FB: allocated DMA channel 0 @ b880f000
[    0.352409] Console: switching to colour frame buffer device 200x75
[    0.389087] bcm2835-rng 3f104000.rng: hwrng registered
[    0.389234] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[    0.389966] vc-sm: Videocore shared memory driver
[    0.411316] brd: module loaded
[    0.423273] loop: module loaded
[    0.423290] Loading iSCSI transport class v2.0-870.
[    0.424053] usbcore: registered new interface driver smsc95xx
[    0.424077] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.652274] Core Release: 2.80a
[    0.652287] Setting default values for core params
[    0.652332] Finished setting default values for core params
[    0.852793] Using Buffer DMA mode
[    0.852802] Periodic Transfer Interrupt Enhancement - disabled
[    0.852807] Multiprocessor Interrupt Enhancement - disabled
[    0.852816] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.852831] Dedicated Tx FIFOs mode
[    0.853389] WARN::dwc_otg_hcd_init:1032: FIQ DMA bounce buffers: virt = 0xb7914000 dma = 0xf7914000 len=9024
[    0.853424] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[    0.853433] dwc_otg: Microframe scheduler enabled
[    0.853505] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80590a9c
[    0.853518] WARN::hcd_init_fiq:460: FIQ ASM at 0x80590e0c length 36
[    0.853532] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb887a000
[    0.853616] dwc_otg 3f980000.usb: DWC OTG Controller
[    0.853685] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    0.853734] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    0.853785] Init: Port Power? op_state=1
[    0.853791] Init: Power Port (0)
[    0.854115] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.854129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.854139] usb usb1: Product: DWC OTG Controller
[    0.854149] usb usb1: Manufacturer: Linux 4.9.72-v7+ dwc_otg_hcd
[    0.854159] usb usb1: SerialNumber: 3f980000.usb
[    0.855261] hub 1-0:1.0: USB hub found
[    0.855335] hub 1-0:1.0: 1 port detected
[    0.856209] dwc_otg: FIQ enabled
[    0.856216] dwc_otg: NAK holdoff enabled
[    0.856221] dwc_otg: FIQ split-transaction FSM enabled
[    0.856239] Module dwc_common_port init
[    0.856647] usbcore: registered new interface driver usb-storage
[    0.856991] mousedev: PS/2 mouse device common for all mice
[    0.858408] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.858774] bcm2835-cpufreq: min=600000 max=1000000
[    0.859328] sdhci: Secure Digital Host Controller Interface driver
[    0.859335] sdhci: Copyright(c) Pierre Ossman
[    0.859712] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe
[    0.859993] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.860812] ledtrig-cpu: registered to indicate activity on CPUs
[    0.860988] hidraw: raw HID events driver (C) Jiri Kosina
[    0.861210] usbcore: registered new interface driver usbhid
[    0.861216] usbhid: USB HID core driver
[    0.862246] vchiq: vchiq_init_state: slot_zero = 0xb7980000, is_master = 0
[    0.864038] [vc_sm_connected_init]: start
[    0.873869] [vc_sm_connected_init]: end - returning 0
[    0.874313] Initializing XFRM netlink socket
[    0.874348] NET: Registered protocol family 17
[    0.874506] Key type dns_resolver registered
[    0.875015] Registering SWP/SWPB emulation handler
[    0.876127] registered taskstats version 1
[    0.883045] uart-pl011 3f201000.serial: cts_event_workaround enabled
[    0.883150] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    0.883221] console [ttyAMA0] enabled
[    0.885548] sdhost: log_buf @ b7913000 (f7913000)
[    0.965451] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    0.965557] of_cfs_init
[    0.965688] of_cfs_init: OK
[    0.966491] Waiting for root device /dev/mmcblk0p2...
[    1.032639] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.034632] mmc0: new high speed SDHC card at address 59b4
[    1.035644] mmcblk0: mmc0:59b4 NCard 30.0 GiB
[    1.037368]  mmcblk0: p1 p2
[    1.075568] Indeed it is in host mode hprt0 = 00021501
[    1.107704] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.107784] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    1.108775] devtmpfs: mounted
[    1.137547] Freeing unused kernel memory: 1024K
[    1.162017] random: fast init done
[    1.275474] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    1.275673] Indeed it is in host mode hprt0 = 00001101
[    1.505852] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    1.505870] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.506952] hub 1-1:1.0: USB hub found
[    1.507073] hub 1-1:1.0: 5 ports detected
[    1.542683] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    1.543265] systemd[1]: Detected architecture 'arm'.
[    1.688822] NET: Registered protocol family 10
[    1.691074] systemd[1]: Inserted module 'ipv6'
[    1.693653] systemd[1]: Set hostname to <raspberrypi>.
[    1.794488] uart-pl011 3f201000.serial: no DMA platform data
[    1.825519] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    1.955886] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    1.955908] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.959126] smsc95xx v1.0.5
[    2.050903] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:64:40:e8
[    2.345527] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[    2.368549] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    2.369085] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.369205] systemd[1]: Expecting device dev-ttyAMA0.device...
[    2.369462] systemd[1]: Starting Remote File Systems (Pre).
[    2.369557] systemd[1]: Reached target Remote File Systems (Pre).
[    2.369684] systemd[1]: Starting Encrypted Volumes.
[    2.480835] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0b07
[    2.480858] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.480868] usb 1-1.2: Product: Logitech BT Mini-Receiver
[    2.480878] usb 1-1.2: Manufacturer: Logitech
[    2.482835] hub 1-1.2:1.0: USB hub found
[    2.483469] hub 1-1.2:1.0: 3 ports detected
[    2.494489] fuse init (API version 7.26)
[    2.583865] i2c /dev entries driver
[    2.585576] usb 1-1.4: new high-speed USB device number 5 using dwc_otg
[    2.668002] media: Linux media interface: v0.10
[    2.724450] Linux video capture interface: v2.00
[    2.735532] usb 1-1.4: New USB device found, idVendor=148f, idProduct=5370
[    2.735554] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.735565] usb 1-1.4: Product: 802.11 n WLAN
[    2.735575] usb 1-1.4: Manufacturer: Ralink
[    2.735585] usb 1-1.4: SerialNumber: 1.0
[    2.815540] usb 1-1.2.2: new full-speed USB device number 6 using dwc_otg
[    2.873894] systemd-udevd[136]: starting version 215
[    2.979571] usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c71e
[    2.979623] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.979645] usb 1-1.2.2: Product: Logitech BT Mini-Receiver
[    2.979660] usb 1-1.2.2: Manufacturer: Logitech
[    2.979670] usb 1-1.2.2: SerialNumber: 001F201071FE
[    3.002392] input: Logitech Logitech BT Mini-Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C71E.0001/input/input0
[    3.067275] hid-generic 0003:046D:C71E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-3f980000.usb-1.2.2/input0
[    3.165545] usb 1-1.2.3: new full-speed USB device number 7 using dwc_otg
[    3.325888] usb 1-1.2.3: New USB device found, idVendor=046d, idProduct=c71f
[    3.325914] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.325925] usb 1-1.2.3: Product: Logitech BT Mini-Receiver
[    3.325936] usb 1-1.2.3: Manufacturer: Logitech
[    3.325946] usb 1-1.2.3: SerialNumber: 001F201071FE
[    3.611256] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[    3.781335] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.238486] input: Logitech Logitech BT Mini-Receiver as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/0003:046D:C71F.0002/input/input1
[    4.312355] logitech 0003:046D:C71F.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-3f980000.usb-1.2.3/input0
[    4.449365] systemd-journald[122]: Received request to flush runtime journal from PID 1
[    4.575559] usb 1-1.4: reset high-speed USB device number 5 using dwc_otg
[    4.716669] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[    4.740603] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[    4.781257] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.785342] usbcore: registered new interface driver rt2800usb
[    6.713512] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[    6.716484] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[    7.050822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.340215] random: crng init done
[    8.111101] Adding 102396k swap on /var/swap.  Priority:-1 extents:5 across:1929212k SSFS
[    8.498382] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    9.975015] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   15.669271] Bluetooth: Core ver 2.22
[   15.669398] NET: Registered protocol family 31
[   15.669405] Bluetooth: HCI device and connection manager initialized
[   15.669432] Bluetooth: HCI socket layer initialized
[   15.669446] Bluetooth: L2CAP socket layer initialized
[   15.669488] Bluetooth: SCO socket layer initialized
[   15.714528] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.714544] Bluetooth: BNEP filters: protocol multicast
[   15.714575] Bluetooth: BNEP socket layer initialized

Secondo voi c'è il modulo caricato?
Risposta
  


Vai al forum:


Navigazione: 1 Ospite(i)
Forum con nuovi Post
Forum senza nuovi post
Forum bloccato
Forum Redirect